this is pretty dope, I’m guessing this is what a lot of people use to make some of their jewelry pieces like Johnny Cupcakes has.
Jimiyo, I want to thank you too man, I’m know there a bunch of others on here that post up helpful and useful information to the rest of the Emptees community but you definitely are the tops in my book. I haven’t been on here long, just been turned onto the website a few months ago and you’re definitely consistent with bringing up those around you. There are a ton of us on here who don’t know you and luckily have the opportunity to learn and grow with the help from yourself and some of the others. So hat’s off to you bro, keep doing what you’re doing and best of luck and much success, you deserve it from the little I know of you. Thanks again!
hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
DECOYTMX said: hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
DECOYTMX said: hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
Stick your arm in there and take a picture.
no point, can’t sub for the Halloweek contest anymore. ;)
DECOYTMX said: hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
DECOYTMX said: hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
Stick your arm in there and take a picture.
i improvised a little
Ok, now stick your arm in there and slice that into your arm! Actually, that is pretty slick.
DECOYTMX said: hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
What type of file formats does the machines software support?
DECOYTMX said: hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
What type of file formats does the machines software support?
well since its an architecture school...i think it only cuts from autocad...but im sure there are other formats that it can read.
The reason I’m asking what file format or program is used is cause recently I made a sign for a restaurant out of aluminum and had made in Illustrator first, redid it in AutoCAD and then the operator of the CNC Plasma machine had another program that he used that took the AutoCAD file and he had to manipulate it to make sure it was correct since some things where thrown off when importing the file. Then he selected the order of the cuts. So, is this a similar process using this machine? Other than needing to use illustrator of course....
14 Comments
heavyprints said 2 months ago
Looks gnarly man.
MadeByMAS said 2 months ago
I love clean websites and good ideas...
Ameeee said 2 months ago
I’m intrigued by the whole website - it looks like they can ship from NZ too.
Eric should make Linty Fresh Earrings..
Greg Abbott said 2 months ago
Looks cool!
djredbrownie said 2 months ago
this is pretty dope, I’m guessing this is what a lot of people use to make some of their jewelry pieces like Johnny Cupcakes has.
Jimiyo, I want to thank you too man, I’m know there a bunch of others on here that post up helpful and useful information to the rest of the Emptees community but you definitely are the tops in my book. I haven’t been on here long, just been turned onto the website a few months ago and you’re definitely consistent with bringing up those around you. There are a ton of us on here who don’t know you and luckily have the opportunity to learn and grow with the help from yourself and some of the others. So hat’s off to you bro, keep doing what you’re doing and best of luck and much success, you deserve it from the little I know of you. Thanks again!
DECOYTMX said 2 months ago
hah. my school has 3 of those laser cutters...im actually working in the laser shop right now. these machines are absolutely amazing and they could cut through almost anything.
molasses4masses said 2 months ago
Stick your arm in there and take a picture.
downrodeo said 2 months ago
no point, can’t sub for the Halloweek contest anymore. ;)
DECOYTMX said 2 months ago
i improvised a little
molasses4masses said 2 months ago
Ok, now stick your arm in there and slice that into your arm! Actually, that is pretty slick.
djredbrownie said 2 months ago
What type of file formats does the machines software support?
Acid said 2 months ago
We’ve got some of those machines in our university... pretty cool. The guy said they cost a couple of grand each.
Watchin that video, did you see how quickly he typed in his email and password!?
DECOYTMX said 2 months ago
well since its an architecture school...i think it only cuts from autocad...but im sure there are other formats that it can read.
djredbrownie said 2 months ago
The reason I’m asking what file format or program is used is cause recently I made a sign for a restaurant out of aluminum and had made in Illustrator first, redid it in AutoCAD and then the operator of the CNC Plasma machine had another program that he used that took the AutoCAD file and he had to manipulate it to make sure it was correct since some things where thrown off when importing the file. Then he selected the order of the cuts. So, is this a similar process using this machine? Other than needing to use illustrator of course....